Text in Illustration
Result:
(d) Reconnect the canister pump module connector.
B -- REPAIR OR REPLACE HARNESS OR CONNECTOR (CANISTER PUMP MODULE - ECM)
A -- Continue to next step.
2. REPLACE CANISTER
(a) Replace the canister See: Powertrain Management/Emission Control Systems/Evaporative Emissions System/Evaporative Emission
Control Canister/Service and Repair/Removal.
NOTICE:
When replacing the canister, check the canister pump module interior and related pipes for water, fuel and other liquids. If
liquids are present, check for disconnections and/or cracks in the following: 1) the pipe from the air inlet port to the canister
pump module; 2) the canister filter; and 3) the fuel tank vent hose.
Text in Illustration
NEXT -- CHECK WHETHER DTC OUTPUT RECURS (AFTER REPAIR)
3. REPAIR OR REPLACE HARNESS OR CONNECTOR (CANISTER PUMP MODULE - ECM)
HINT
If the exhaust tail pipe assembly has been removed, go to the next step before reinstalling it.
No comments:
Post a Comment