2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 44

A -- END

3. REPLACE TELEVISION DISPLAY ASSEMBLY RH

(a) Replace the television display assembly RH See: Accessories and Optional Equipment/Entertainment Systems/Television /

Monitor/Service and Repair/Removal.

(b) Recheck for DTCs and check if the same DTC is output again See: Accessories and Optional Equipment/Entertainment

Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.

Result:

B -- REPLACE MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY See: Accessories and Optional Equipment/Entertainment

Systems/Entertainment System Control Module/Service and Repair/Rear Seat Entertainment ECU/Removal

A -- END

From 08/2009

AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: B15B0: Display Screen Malfunction

B15B0 - Display Screen Malfunction

DESCRIPTION

This DTC is stored when a malfunction occurs in the display and navigation module display or multi-display controller sub-assembly.

HINT

* The trouble area cannot be determined by checking DTCs with the Techstream. It is necessary to display the "System Check

Mode" screen to determine the trouble area.

* If the picture circuit is faulty, the display and navigation module display store the DTC.

* If the picture circuit between the multi-display controller sub-assembly and the television display assembly LH or television

display assembly RH is faulty, the multi-display controller sub-assembly stores this DTC.

INSPECTION PROCEDURE

PROCEDURE

1. CLEAR DTC

(a) Clear the DTCs See: Accessories and Optional Equipment/Entertainment Systems/Testing and Inspection/Reading and Clearing

Diagnostic Trouble Codes.

NEXT -- Continue to next step.

2. RECHECK DTC

(a) Recheck for DTCs.

HINT

* The trouble area cannot be determined by checking DTCs with the Techstream. It is necessary to display the "System Check

Mode" screen to determine the trouble area.

* If the picture circuit is faulty, the display and navigation module display store the DTC.

* If the picture circuit between the multi-display controller sub-assembly and the television display assembly LH or television

display assembly RH is faulty, the multi-display controller sub-assembly stores this DTC.

(1) Display the "System Check Mode" screen. See: Accessories and Optional Equipment/Entertainment Systems/Testing and

Inspection/Reading and Clearing Diagnostic Trouble Codes.