(f) for 9 Speakers:
Measure the resistance between each of the rear No. 1 speakers and the stereo component amplifier assembly to check for an open
circuit in the wire harness.
Standard Resistance:
(h) for 12 Speakers:
Measure the resistance between each of the rear No. 2 speakers and the stereo component amplifier assembly to check for an open
circuit in the wire harness.
Standard Resistance:
(j) for 12 Speakers:
Measure the resistance between each of the rear No. 2 speakers and the rear No. 1 speakers to check for an open circuit in the wire
harness.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. INSPECT FRONT NO. 1 SPEAKER
(a) Resistance check
(1) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment