(e) Clear the DTC See: Body and Frame/Seats/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
(f) Recheck for DTC B2658.
Result:
B -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
A -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU AND SWITCH ASSEMBLY - SLIDE MOTOR)
(a) Disconnect the a8 connector from the position control ECU and switch assembly.
(b) Disconnect the a13 connector from the slide motor.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. CHECK FRONT SEAT ASSEMBLY LH (SEAT SLIDE POSITION SENSOR)
(a) Reconnect the a8 connector to the position control ECU and switch assembly.
No comments:
Post a Comment