OK:
The installation bolts are tightened properly and there is no clearance between the sensor and transaxle case.
NG -- REPAIR OR REPLACE SPEED SENSOR See: Powertrain Management/Transmission Control Systems/Sensors and
Switches - Transmission and Drivetrain/Sensors and Switches - A/T/Transmission Speed Sensor/Service and Repair/U660E Automatic
Transaxle/Removal
OK -- Continue to next step.
2. INSPECT TRANSMISSION WIRE
(a) Remove the TCM.
(b) Disconnect the speed sensor connector from the transmission wire.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE TRANSMISSION WIRE See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Wiring
Harness/Service and Repair/U660E Automatic Transaxle/Removal
OK -- Continue to next step.
3. REPLACE SPEED SENSOR
(a) See: Powertrain Management/Transmission Control Systems/Sensors and Switches - Transmission and Drivetrain/Sensors and
No comments:
Post a Comment