NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE A/C AMPLIFIER
Up to 08/2009
HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1422/22: Compressor Lock Sensor Circuit
B1422/22 - Compressor Lock Sensor Circuit
SYSTEM DESCRIPTION
The ECM sends the engine speed signal to the A/C amplifier via CAN communication.
The A/C amplifier reads the difference between compressor speed and engine speed. When the difference becomes too large, the A/C amplifier
determines that the compressor is locked, and turns the magnetic clutch off.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK CAN COMMUNICATION SYSTEM
(a) Use the Techstream to check if the CAN communication system is functioning normally.
Result:
B -- GO TO CAN COMMUNICATION SYSTEM See: Powertrain Management/Computers and Control Systems/Information
Bus/Testing and Inspection/Initial Inspection and Diagnostic Overview/CAN Communication System/How to Proceed With
Troubleshooting
A -- Continue to next step.
2. INSPECT A/C COMPRESSOR (A/C LOCK SENSOR)
(a) Disconnect the A/C compressor connector.
No comments:
Post a Comment