(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
8. CHECK FOR A/C SYSTEM LEAK
(a) Install the manifold gauge set.
(b) Recover the refrigerant from the A/C system using a refrigerant recovery unit.
(c) Evacuate the A/C system and check that vacuum can be maintained.
OK:
Vacuum can be maintained in the A/C system.
HINT
If vacuum cannot be maintained in the A/C system, there may be a refrigerant leak. In this case, it is necessary to repair or
replace the leaking part of the A/C system.
NG -- REPAIR A/C SYSTEM LEAK
OK -- Continue to next step.
9. CHARGE REFRIGERANT
(a) Add an appropriate amount of refrigerant See: Heating and Air Conditioning/Service and Repair.
NEXT -- Continue to next step.
10. RECHECK FOR DTC
(a) Recheck for the DTC when the following conditions are satisfied.
No comments:
Post a Comment