INSPECTION PROCEDURE
NOTICE:
Perform the universal trip to clear permanent DTCs See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/U660E Automatic Transaxle
System/DTC Check / Clear.
PROCEDURE
1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0877 OR P0878)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / ECT / Trouble Codes.
(e) Read the DTCs using the Techstream.
Result:
HINT
If a solenoid is stuck OFF, DTCs for several solenoids including the malfunctioning solenoid will be detected.
C -- GO TO DTC CHART See: Diagnostic Trouble Code Descriptions/Automatic Transaxle System - U660E
B -- CHECK TRANSMISSION WIRE
A -- Continue to next step.
2. CHECK TRANSMISSION WIRE (SHORT TO GROUND)
No comments:
Post a Comment