NEXT -- Continue to next step.
2. RECHECK FOR DTC
(a) Using the Techstream, recheck for DTCs.
Result:
HINT
If the AFS ECU (headlight swivel ECU assembly) stores B2450 even though the ECU has been initialized, there may be a
malfunction in the AFS ECU (headlight swivel ECU assembly).
B -- REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY) See: Lighting and Horns/Headlamp/Headlamp
Alignment Control Module/Service and Repair/Components
A -- END
From 08/2009
LIGHTING (EXT): LIGHTING SYSTEM: B2450: Initialization has not been Performed
B2450 - Initialization has not been Performed
DESCRIPTION
The AFS ECU (headlight swivel ECU assembly) stores this DTC if initialization has not been performed after the ECU was replaced.
INSPECTION PROCEDURE
PROCEDURE
1. PERFORM INITIALIZATION
(a) Perform initialization of the AFS ECU (headlight swivel ECU assembly) See: Lighting and Horns/Testing and
Inspection/Programming and Relearning/Exterior Lighting System/Initialization.
NEXT -- Continue to next step.
2. RECHECK FOR DTC
(a) Using the Techstream, recheck for DTCs.
Result:
HINT
If the AFS ECU (headlight swivel ECU assembly) stores B2450 even though the ECU has been initialized, there may be a
malfunction in the AFS ECU (headlight swivel ECU assembly).
B -- REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY) See: Lighting and Horns/Headlamp/Headlamp
Alignment Control Module/Service and Repair/Components
No comments:
Post a Comment