2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) P Code Charts Page 2855

HINT

- This test can be conducted when the vehicle speed is 60 km/h (37 mph) or more.

(h) Lightly depress the accelerator pedal and check that the engine speed does not change abruptly.

HINT

- When changing the accelerator pedal opening angle while driving, if the engine speed does not change, lock-up is on.

- Slowly release, but not fully, the accelerator pedal in order to decelerate. (Fully releasing the pedal will close the throttle valve

and lock-up may be turned off.)

PROCEDURE

1. CHECK OTHER DTCS OUTPUT (IN ADDITION TO DTC P2757)

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / ECT / Trouble Codes.

(e) Read the DTCs using the Techstream.

Result:

HINT

If any other codes besides "P2757" are output, perform troubleshooting for those DTCs first.

B -- GO TO DTC CHART

A -- Continue to next step.

2. INSPECT SHIFT SOLENOID VALVE SLU

(a) Remove shift solenoid valve SLU.