(d) Measure the resistance between the display and navigation module display and stereo component amplifier assembly according to the
value(s) in the table below.
Standard Resistance:
(e) Measure the resistance between the radio receiver assembly and stereo component amplifier assembly according to the value(s) in the
table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY
(a) Replace the stereo component amplifier assembly See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Amplifier/Service and Repair/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for DVD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY
No comments:
Post a Comment