(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / ECT / Trouble Codes.
(e) Read the DTCs using the Techstream.
Result:
HINT
If any other codes besides "P0741" are output, perform the troubleshooting for those DTCs first.
B -- GO TO DTC CHART See: Diagnostic Trouble Code Descriptions/Automatic Transaxle System - U660E
A -- Continue to next step.
2. CHECK TRANSMISSION WIRE
(a) Remove the TCM from the transaxle.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
B -- INSPECT SHIFT SOLENOID VALVE SL (OPERATION)
A -- Continue to next step.
3. INSPECT SHIFT SOLENOID VALVE SL (RESISTANCE)
(a) Remove shift solenoid valve SL.
No comments:
Post a Comment