2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 503

HINT

* Electrical noise from radio waves generated by optional components or the wiring for those components may affect MOST

communication.

* This DTC may be stored when an MOST communication error occurs due to electrical noise.

B -- CHECK DTC

A -- Continue to next step.

2. REMOVE OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)

(a) Remove optional components (including associated wiring).

NOTICE:

Do not remove optional components or associated wiring without the permission of the customer.

NEXT -- Continue to next step.

3. CHECK DTC

(a) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing

Diagnostic Trouble Codes/Navigation System (for HDD).

(b) Recheck for DTCs and check if the same DTC is output again.

OK:

No DTCs are output.

NG -- CHECK HARNESS AND CONNECTOR (REMOTE TOUCH POWER SOURCE)

OK -- END

1. CHECK HARNESS AND CONNECTOR (REMOTE TOUCH POWER SOURCE)

(a) Disconnect the G13 remote touch connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

(c) Measure the voltage according to the value(s) in the table below.