(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPLACE POSITION CONTROL ECU AND SWITCH ASSEMBLY See: Body and Frame/Seats/Power Seat
Switch/Service and Repair/Power Seat Switch/Removal
OK -- REPLACE FRONT SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal
5. INSPECT FRONT SEAT ASSEMBLY LH (SLIDE MOTOR)
(a) Disconnect the a13 connector from the slide motor.
(b) Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.
OK:
Text in Illustration
NG -- REPLACE FRONT SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal
OK -- Continue to next step.
6. CHECK HARNESS AND CONNECTOR (POSITION CONTROL ECU AND SWITCH ASSEMBLY - SLIDE MOTOR)
(a) Disconnect the a9 connector from the position control ECU and switch assembly.
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment