2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) P Code Charts Page 428

- If the test result is UNKNOWN, enter the following menus: Powertrain / Engine / Trouble Codes / Pending.

- Read Pending DTCs.

HINT

If a pending DTC is output, the system is malfunctioning.

- If the test result is INCOMPLETE or UNKNOWN and no pending DTC is output, perform a universal trip and check for permanent DTCs

See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC

Check / Clear.

HINT

- If a permanent DTC is output, the system is malfunctioning.

- If no permanent DTC is output, the system is normal.

INSPECTION PROCEDURE

PROCEDURE

1. READ OUTPUT DTC (DTC P060B)

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Clear the DTCs See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Reading and Clearing

Diagnostic Trouble Codes/DTC Check / Clear.

(e) Turn the engine switch off.

(f) Turn the Techstream off.

(g) Disconnect the Techstream.

(h) Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

(i) Connect the cable to the negative (-) battery terminal.

(j) Connect the Techstream to the DLC3.

(k) Turn the engine switch on (IG).

(l) Turn the Techstream on.

(m)Enter the following menus: Powertrain / Engine / Trouble Codes.

(n) Read the DTCs.

Result:

C -- GO TO DTC (P0327, P0328, P0332 AND P0333)

B -- REPLACE ECM See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and

Repair/Removal

A -- CHECK FOR INTERMITTENT PROBLEMS

From 08/2009

2GR-FE ENGINE CONTROL: SFI SYSTEM: P060B: Internal Control Module A/D Processing Performance

P060B - Internal Control Module A/D Processing Performance