(c) Measure the resistance and voltage according to the value(s) in the table below.
Standard Resistance:
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. CHECK ID CODE BOX (IMMOBILISER CODE ECU) (WAVEFORM)
(a) Reconnect the ID code box (immobiliser code ECU) connector.
(b) Reconnect the ECM connector.
(c) Using an oscilloscope, check the waveform.
Waveform (Reference):
OK:
Waveform is output normally (see illustration).
No comments:
Post a Comment