2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) P Code Charts Page 1746

(d) Reconnect the canister pump module connector.

(e) Reconnect the ECM connector.

B -- REPAIR OR REPLACE HARNESS OR CONNECTOR (CANISTER PUMP MODULE - ECM)

A -- REPLACE CANISTER

1. CHECK HARNESS AND CONNECTOR (CANISTER PUMP MODULE - ECM)

(a) Disconnect the canister pump module connector.

(b) Turn the engine switch on (IG).

(c) Measure the voltage and resistance according to the value(s) in the table below.

Standard Voltage:

Standard Resistance (Check for Open):

Text in Illustration

Result:

(d) Reconnect the canister pump module connector.

B -- REPAIR OR REPLACE HARNESS OR CONNECTOR (CANISTER PUMP MODULE - ECM)

A -- Continue to next step.

2. REPLACE CANISTER

(a) Replace the canister See: Powertrain Management/Emission Control Systems/Evaporative Emissions System/Evaporative Emission

Control Canister/Service and Repair/Removal.

NOTICE:

When replacing the canister, check the canister pump module interior and related pipes for water, fuel and other liquids. If