(e) Read the DTCs using the Techstream.
Result:
HINT
If a solenoid is stuck OFF, DTCs for several solenoids including the malfunctioning solenoid will be detected.
C -- GO TO DTC CHART See: Diagnostic Trouble Code Descriptions/Automatic Transaxle System - U660F
B -- CHECK TRANSMISSION WIRE
A -- Continue to next step.
2. CHECK TRANSMISSION WIRE (SHORT TO GROUND)
(a) Remove the TCM.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
B -- REPLACE TCM See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and
Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/U660F Automatic Transaxle/Removal
A -- Continue to next step.
3. CHECK ATF TEMPERATURE SENSOR ASSEMBLY (ATF PRESSURE SWITCH NO. 3)
(a) Remove the oil strainer assembly.
(b) Disconnect the connector from the ATF temperature sensor assembly.
No comments:
Post a Comment