Condition (A) and (B)
Condition (C)
COMPONENT OPERATING RANGE
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Perform the universal trip to clear permanent DTCs See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/U660E Automatic Transaxle
System/DTC Check / Clear.
HINT
The following table shows normal operation of the shift solenoid valve SL1 when the shift lever is in D:
PROCEDURE
1. INSPECT TRANSMISSION WIRE (SL1)
(a) Remove the TCM from the transaxle.
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment