Standard Resistance (Check for Open):
Standard Resistance (Check for Short):
Text in Illustration
(d) Reconnect the ECM connector.
(e) Reconnect the throttle with motor body assembly connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (THROTTLE POSITION SENSOR - ECM)
OK -- Continue to next step.
3. INSPECT ECM (VC VOLTAGE)
(a) Disconnect the throttle with motor body assembly connector.
(b) Turn the engine switch on (IG).
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
(d) Reconnect the throttle with motor body assembly connector.
NG -- REPLACE ECM See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and
Repair/Removal
OK -- Continue to next step.
4. REPLACE THROTTLE WITH MOTOR BODY ASSEMBLY
No comments:
Post a Comment