Standard Resistance (Check for Short):
Text in Illustration
(d) Reconnect the accelerator pedal sensor assembly connector.
(e) Reconnect the ECM connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (ACCELERATOR PEDAL SENSOR ASSEMBLY - ECM)
OK -- Continue to next step.
3. INSPECT ECM (VCPA AND VCP2 VOLTAGE)
(a) Disconnect the accelerator pedal sensor assembly connector.
(b) Turn the engine switch on (IG).
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
(d) Reconnect the accelerator pedal sensor assembly connector.
NG -- REPLACE ECM See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and
Repair/Removal
OK -- Continue to next step.
4. REPLACE ACCELERATOR PEDAL SENSOR ASSEMBLY
No comments:
Post a Comment