8. CHECK HARNESS AND CONNECTOR (VCI, TIS TERMINAL VOLTAGE)
(a) Reconnect the F36 multiplex tilt and telescopic ECU connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
9. CHECK TILT POSITION SENSOR
(a) Reconnect the F35 tilt motor connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPLACE STEERING COLUMN ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal and Replacement/Removal
OK -- REPLACE MULTIPLEX TILT AND TELESCOPIC ECU
Up to 08/2009
STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: B2611: Telescopic Position
Sensor or Telescopic Motor Circuit Malfunction
B2611 - Telescopic Position Sensor or Telescopic Motor Circuit Malfunction
DESCRIPTION
The telescopic motor is operated by the power source voltage supplied from the multiplex tilt and telescopic ECU and slides the steering column
No comments:
Post a Comment