2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) P Code Charts Page 1900

TYPICAL MALFUNCTION THRESHOLDS

CONFIRMATION DRIVING PATTERN

- Connect the Techstream to the DLC3.

- Turn the engine switch on (IG) and turn the Techstream on.

- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure) See: Powertrain Management/Computers and Control

Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.

- Turn the engine switch off.

- Turn the engine switch on (IG) and turn the Techstream on [A].

- Idle the engine for 5 minutes or more [B].

- Enter the following menus: Powertrain / Engine / Utility / All Readiness.

- Input the DTC: P0617.

- Check the DTC judgment result [C].

CAUTION:

When performing the confirmation driving pattern, obey all speed limits and traffic laws.

HINT

- If the judgment result shows ABNORMAL, the system has a malfunction.

- If the judgment result shows INCOMPLETE or UNKNOWN, perform steps [D] and [E].

- Drive the vehicle at 15 mph (24 km/h) or more for 20 seconds or more [D].

- Check the DTC judgment result [E].

- If the test result is UNKNOWN, enter the following menus: Powertrain / Engine / Trouble Codes / Pending.