Text in Illustration
(c) Connect a battery positive (+) lead with a 21 W bulb to terminal 2 and a negative (-) lead to terminal 1 of the solenoid valve connector.
Then check that the valve moves and makes an operating sound.
OK:
Valve moves and makes an operating sound.
NG -- REPLACE SHIFT SOLENOID VALVE SLT See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Removal and Replacement/U660F Automatic Transaxle/Removal
OK -- Continue to next step.
2. INSPECT TRANSMISSION VALVE BODY ASSEMBLY
(a) Check the transmission valve body assembly See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Removal and Replacement/U660F Automatic Transaxle/Removal.
OK:
There are no foreign objects on each valve and they operate smoothly.
NG -- REPLACE TRANSMISSION VALVE BODY ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Valve Body/Service and Repair/Removal and Replacement/U660F Automatic Transaxle/Removal
OK -- REPLACE AUTOMATIC TRANSMISSION ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/U660F Automatic Transaxle/Transaxle Assembly/Removal
Up to 08/2009
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: P2716: Pressure Control Solenoid "D"
Electrical (Shift Solenoid Valve SLT)
P2716 - Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)
DESCRIPTION
Refer to DTC P2714 See: P2714.
MONITOR DESCRIPTION
When an open or short in the linear solenoid valve (SLT) circuit is detected, the TCM interprets this as a fault. The TCM will turn on the MIL and
No comments:
Post a Comment