(a) Using the Techstream, perform Sensitivity Check See: Restraints and Safety Systems/Testing and Inspection/Programming and
Relearning.
Standard:
27 to 33 kg (59.5 to 72.8 lb)
NEXT -- END
Up to 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION SYSTEM: B1794: Open in Occupant Classification ECU
Battery Positive Line
B1794 - Open in Occupant Classification ECU Battery Positive Line
DESCRIPTION
DTC B1794 is set when a malfunction is detected in the occupant classification ECU.
HINT
* When DTC B1650/32 is detected as a result of troubleshooting the supplemental restraint system, perform troubleshooting for
DTC B1794 of the occupant classification system.
* Use the Techstream to check for DTCs of the occupant classification ECU, otherwise the DTCs cannot be read.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1. CHECK BATTERY
(a) Measure the voltage of the battery.
Standard Voltage:
11 to 14 V
NG -- REPLACE BATTERY
OK -- Continue to next step.
No comments:
Post a Comment