OK -- END
11. REPLACE FRONT SEAT ASSEMBLY RH
(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
(c) Replace the front seat assembly RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Removal.
NEXT -- Continue to next step.
12. PERFORM ZERO POINT CALIBRATION
(a) Connect the cable to the negative (-) battery terminal.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG).
(d) Using the Techstream, perform Zero Point Calibration See: Restraints and Safety Systems/Testing and Inspection/Programming and
Relearning.
OK:
"Zero Point Calibration is complete." is displayed.
NEXT -- Continue to next step.
13. PERFORM SENSITIVITY CHECK
(a) Using the Techstream, perform Sensitivity Check See: Restraints and Safety Systems/Testing and Inspection/Programming and
Relearning.
Standard:
27 to 33 kg (59.5 to 72.8 lb)
NEXT -- END
Up to 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION SYSTEM: B1782: Rear Occupant Classification Sensor
LH Circuit Malfunction
B1782 - Rear Occupant Classification Sensor LH Circuit Malfunction
DESCRIPTION
The rear occupant classification sensor LH circuit consists of the occupant classification ECU and rear occupant classification sensor LH.
DTC B1782 is stored when a malfunction is detected in the rear occupant classification sensor LH circuit.
HINT
When DTC B1650/32 is detected as a result of troubleshooting for the airbag system, check the DTCs stored in the occupant
classification ECU. When DTC B1782 is output, perform troubleshooting for the DTC.
No comments:
Post a Comment