2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 1492

period of time may cause seat rail deformation.

PROCEDURE

1. CHECK CONNECTORS

(a) Turn the engine switch off.

(b) Disconnect the cable from the negative (-) battery terminal.

(c) Check that the connectors are properly connected to the occupant classification ECU and front seat inner belt assembly RH.

OK:

The connectors are properly connected.

HINT

If the connectors are not connected securely, reconnect the connectors and proceed to the next inspection.

(d) Disconnect the connectors from the occupant classification ECU and front seat inner belt assembly RH.

(e) Check that the terminals of connectors are not damaged.

OK:

The terminals are not deformed or damaged.

NG -- REPLACE FRONT SEAT WIRE RH

OK -- Continue to next step.

2. CHECK FRONT SEAT WIRE RH (SHORT TO B+)

(a) Connect the cable to the negative (-) battery terminal.

(b) Turn the engine switch on (IG).

(c) Measure the voltage according to the value(s) in the table below.