Wednesday, October 7, 2020

2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 2601


LIGHTING (EXT): LIGHTING SYSTEM: B2451: Vehicle Specifications have not been Stored



B2451 - Vehicle Specifications have not been Stored



DESCRIPTION



The AFS ECU (headlight swivel ECU assembly) sets this DTC if the vehicle specifications have not been stored in the ECU.



INSPECTION PROCEDURE



PROCEDURE



1. REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY)



(a) Replace the AFS ECU (headlight swivel ECU assembly) with one that has vehicle specifications stored See: Lighting and



Horns/Headlamp/Headlamp Alignment Control Module/Service and Repair/Components.



NEXT -- Continue to next step.



2. PERFORM INITIALIZATION



(a) Perform initialization of the AFS ECU (headlight swivel ECU assembly) See: Lighting and Horns/Testing and



Inspection/Programming and Relearning/Exterior Lighting System/Initialization.



NEXT -- END



From 08/2009



LIGHTING (EXT): LIGHTING SYSTEM: B2451: Vehicle Specifications have not been Stored



B2451 - Vehicle Specifications have not been Stored



DESCRIPTION



The AFS ECU (headlight swivel ECU assembly) sets this DTC if the vehicle specifications have not been stored in the ECU.



INSPECTION PROCEDURE



PROCEDURE



1. REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY)



(a) Replace the AFS ECU (headlight swivel ECU assembly) with one that has vehicle specifications stored See: Lighting and



Horns/Headlamp/Headlamp Alignment Control Module/Service and Repair/Components.



NEXT -- Continue to next step.



2. PERFORM INITIALIZATION



(a) Perform initialization of the AFS ECU (headlight swivel ECU assembly) See: Lighting and Horns/Testing and



Inspection/Programming and Relearning/Exterior Lighting System/Initialization.



NEXT -- END



Up to 08/2009



LIGHTING (EXT): LIGHTING SYSTEM: B2452: Height Control Sensor Data Out of Range When Initializing



B2452 - Height Control Sensor Data Out of Range When Initializing



DESCRIPTION



The AFS ECU (headlight swivel ECU assembly) stores this DTC if the sensor value received from the height control sensor is out of range when

No comments:

Post a Comment