Text in Illustration
NG -- CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - TCM)
OK -- Continue to next step.
3. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Disconnect the park/neutral position switch connector.
(b) Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.
Standard Resistance:
Text in Illustration
NG -- REPLACE PARK/NEUTRAL POSITION SWITCH ASSEMBLY See: Sensors and Switches/Sensors and Switches -
Starting and Charging/Neutral Safety Switch/Service and Repair/U660F Automatic Transaxle/Removal
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - TCM)
(a) Connect the park/neutral position switch connector.
(b) Disconnect the TCM connectors.
(c) Turn the engine switch on (IG), and measure the voltage according to the value(s) in the table below when the shift lever is moved to
No comments:
Post a Comment