2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) P Code Charts Page 164

(c) Align the notch of the crankshaft pulley to the "0" position.

(d) Check if the timing marks of the camshaft pulley and camshaft bearing cap align.

Text in Illustration

(e) Turn the crankshaft clockwise 360锟斤拷 if the timing marks do not align. Check if they align once again.

OK:

The timing marks of the camshaft pulley and the camshaft bearing cap align when the notch of the crankshaft pulley is in the

"0" position.

(f) Reinstall the cylinder head cover sub-assemblies RH and LH.

NG -- ADJUST VALVE TIMING See: Engine, Cooling and Exhaust/Engine/Service and Repair/Overhaul/Disassembly

OK -- Continue to next step.

5. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (FOR INTAKE CAMSHAFT)

(a) Remove the camshaft timing oil control valve assembly for intake camshaft.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

(c) Connect the positive (+) battery terminal to terminal 1 and connect the negative (-) battery terminal to terminal 2. Check the valve

operation.

OK:

Valve moves quickly.

(d) Reinstall the camshaft timing oil control valve assembly for intake camshaft.

NG -- REPLACE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (FOR INTAKE CAMSHAFT) See: Engine,