(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPLACE ATF TEMPERATURE SENSOR ASSEMBLY See: Powertrain Management/Transmission Control
Systems/Sensors and Switches - Transmission and Drivetrain/Sensors and Switches - A/T/Transmission Temperature
Sensor/Switch/Service and Repair/U660E Automatic Transaxle/Removal
OK -- REPLACE TRANSMISSION WIRE See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Wiring
Harness/Service and Repair/U660E Automatic Transaxle/Removal
4. CHECK TRANSMISSION WIRE
(a) Remove the oil strainer assembly.
(b) Remove the TCM.
(c) Disconnect the connector from the ATF temperature sensor assembly.
(d) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment