Tuesday, November 10, 2020

2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) P Code Charts Page 1729


- Turn the engine switch on (IG) and turn the Techstream on.



- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure) See: Powertrain Management/Computers and Control



Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.



- Turn the engine switch off.



- Turn the engine switch on (IG) and turn the Techstream on [A].



- Start the engine and wait 15 minutes or more [B].



- Enter the following menus: Powertrain / Engine / Utility / All readiness.



- Input the DTC: P0441.



- Check the DTC judgment result [C].



NOTICE:



- The Evaporative System Check (Automatic Mode) consists of 5 steps performed automatically by the Techstream. It takes a



maximum of approximately 18 minutes.



- Do not perform the Evaporative System Check when the fuel tank is more than 90% full because the cut-off valve may be



closed, making the fuel tank leak check unavailable.



- Do not run the engine during this operation.



- When the temperature of the fuel is 35锟斤拷C (95锟斤拷F) or more, a large amount of vapor forms and any check results become



inaccurate. When performing the Evaporative System Check, keep the fuel temperature below 35锟斤拷C (95锟斤拷F).



- Turn the engine switch on (IG) and turn the Techstream on.



- Clear the DTCs (even if no DTCs are stored, perform the clear the DTC operation) See: Powertrain Management/Computers and Control



Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.



- Turn the engine switch off.



- Turn the engine switch on (IG) and turn the Techstream on.



- Enter the following menus: Powertrain / Engine / Utility / Evaporative System Check / Automatic Mode [D].



- After the Evaporative System is completed, check for All Readiness by entering the following menus: Powertrain / Engine / Utility / All



Readiness.



- Input the DTC: P0441.



- Check the DTC judgment result [E].



HINT



If the judgment result shows ABNORMAL, the system has a malfunction.



- If the test result is UNKNOWN, enter the following menus: Powertrain / Engine / Trouble Codes / Pending.

No comments:

Post a Comment