(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- CHECK FRONT DOOR WIRE RH (SHORT TO B+)
OK -- Continue to next step.
40. CHECK WIRE HARNESS (SHORT TO GROUND)
(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK FRONT DOOR WIRE RH (SHORT TO GROUND)
OK -- Continue to next step.
41. CHECK REAR AIRBAG SENSOR RH
(a) Connect the connector to the side airbag sensor RH (for rear side) and side airbag sensor RH (for front side).
No comments:
Post a Comment