Hood and Trunk/Doors/Rear Door/Rear Door Window Regulator/Service and Repair/Removal
C -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front Passenger Side) See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
B -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
A -- Continue to next step.
4. CHECK WHETHER PARTS HAVE BEEN INSTALLED CORRECTLY
(a) Check that the power window components are installed correctly.
OK:
Power window components are installed correctly.
HINT
When the power window components are installed correctly, the problem has occurred because the battery is disconnected while
the engine switch is on (IG), the power window components are installed improperly or the motor is overheated.
NG -- INSTALL PARTS CORRECTLY
OK -- END
Up to 08/2009
WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: B2312: Power Window Switch Malfunction
B2312 - Power Window Switch Malfunction
DESCRIPTION
The power window regulator motor assembly is operated by the multiplex network master switch assembly or power window regulator switch
assembly. The power window regulator motor assembly has motor, regulator and ECU functions.
This DTC is output when the ECU built into the regulator motor and master switch determines that the multiplex network master switch assembly or
power window regulator switch assembly is stuck.
HINT
DTC B2312 can be stored in the multiplex network master switch assembly and in each power window regulator motor assembly
(power window ECU).
Master Switch (Multiplex Network Master Switch Assembly)
D-Door Motor (Power Window Regulator Motor Assembly (for Driver Side))
P-Door Motor (Power Window Regulator Motor Assembly (for Front Passenger Side))
No comments:
Post a Comment