1. INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY)
(a) Check that the sliding roof ECU (sliding roof drive gear sub-assembly) can be initialized See: Body and Frame/Roof and Associated
Components/Sunroof / Moonroof/Testing and Inspection/Programming and Relearning/Initialization.
OK:
Sliding roof ECU (sliding roof drive gear sub-assembly) can be initialized.
NG -- REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) See: Body and Frame/Roof and
Associated Components/Sunroof / Moonroof/Service and Repair/Removal and Replacement/Removal
OK -- Continue to next step.
2. CHECK SLIDING ROOF OPERATION
(a) Check the sliding roof auto operation See: Body and Frame/Roof and Associated Components/Sunroof / Moonroof/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Operation Check.
OK:
Auto operation operates normally.
NG -- REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) See: Body and Frame/Roof and
Associated Components/Sunroof / Moonroof/Service and Repair/Removal and Replacement/Removal
OK -- Continue to next step.
3. CHECK DTC OUTPUT
(a) Clear the DTC See: Body and Frame/Roof and Associated Components/Sunroof / Moonroof/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes.
(b) Recheck for DTCs.
OK:
DTC B2343 is not output.
NG -- REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) See: Body and Frame/Roof and
Associated Components/Sunroof / Moonroof/Service and Repair/Removal and Replacement/Removal
OK -- END
Up to 08/2009
SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SYSTEM: B2341,B2344: Sensor (Motor) Failure
B2341 - Sensor (Motor) Failure
B2344 - Position Failure
DESCRIPTION
When the sliding roof ECU (sliding roof drive gear sub-assembly) detects a motor malfunction and the sliding roof operation is stopped, DTC
B2341 is output.
When the sliding roof ECU (sliding roof drive gear sub-assembly) detects a gear position malfunction and the sliding roof operation is stopped, DTC
No comments:
Post a Comment