2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 329

HINT

* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.

* The display and navigation module display is the master unit.

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)

(a) Check for optional components.

(1) Check that optional components (including associated wiring) which generate radio waves are not installed.

Result:

HINT

* Electrical noise from radio waves generated by optional components or the wiring for those components may affect AVC-LAN

communication.

* This DTC may be stored when an AVC-LAN communication error occurs due to electrical noise.

B -- CHECK DTC

A -- Continue to next step.

2. REMOVE OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)

(a) Remove optional components (including associated wiring).

NOTICE:

Do not remove optional components or associated wiring without the permission of the customer.

NEXT -- Continue to next step.

3. CHECK DTC

(a) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing

Diagnostic Trouble Codes/Navigation System (for HDD).

(b) Recheck for DTCs and check if the same DTC is output again.