E -- READ VALUE USING TECHSTREAM (RR-Door Motor)
D -- READ VALUE USING TECHSTREAM (RL-Door Motor)
C -- READ VALUE USING TECHSTREAM (P-Door Motor)
B -- READ VALUE USING TECHSTREAM (D-Door Motor)
A -- REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY See: Sensors and Switches/Sensors and Switches -
Windows and Glass/Power Window Switch/Service and Repair/Power Window Master Switch/Removal
3. READ VALUE USING TECHSTREAM (D-Door Motor)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / D-Door Motor / Data List.
(e) Read the Data List according to the display on the Techstream.
D-Door Motor (Power Window Regulator Motor Assembly (for Driver Side))
OK:
On the Techstream screen, ON or OFF is displayed accordingly.
NG -- CHECK HARNESS AND CONNECTOR (MASTER SWITCH - DRIVER SIDE MOTOR)
OK -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
4. CHECK HARNESS AND CONNECTOR (MASTER SWITCH - DRIVER SIDE MOTOR)
(a) Disconnect the multiplex network master switch assembly connector.
(b) Disconnect the power window regulator motor assembly (for driver side) connector.
No comments:
Post a Comment