The side collision sensor RH circuit (to determine deployment of the front seat side airbag assembly RH, rear seat side airbag assembly RH and
curtain shield airbag assembly RH) is composed of the center airbag sensor assembly, side airbag sensor RH (for rear side), rear airbag sensor RH
and side airbag sensor RH (for front side).
The side airbag sensor RH (for rear side), rear airbag sensor RH and side airbag sensor RH (for front side) detect impacts to the vehicle and send
signals to the center airbag sensor assembly to determine if the airbag should be deployed.
These DTCs are recorded when a malfunction is detected for the side collision sensor RH circuit (to determine deployment of the front seat side
airbag assembly RH, rear seat side airbag assembly RH and curtain shield airbag assembly RH).
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK PRESENT DTC
(a) Turn the engine switch on (IG), and wait for at least 60 seconds.
(b) Check the present DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/DTC Check / Clear.
Result:
HINT
* DTCs indicating communication errors will be changed to DTCs indicating errors in initialization by turning the engine switch
off and then on (IG) again.
No comments:
Post a Comment