NG -- REPLACE FLOOR WIRE
OK -- Continue to next step.
12. CHECK WIRE HARNESS (OPEN)
(a) Connect the connectors that link the floor wire and front door wire RH.
(b) Using SST, connect terminals 2 (BDR+) and 1 (BDR-) of connector E.
NOTICE:
Do not forcibly insert SST into the terminals of the connector when connecting.
SST : 09843-18040
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK FRONT DOOR WIRE RH (OPEN)
OK -- Continue to next step.
13. CHECK WIRE HARNESS (SHORT)
(a) Disconnect SST from connector E.
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment