NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. REPLACE ECM
(a) Replace the ECM See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and
Repair/Removal.
NEXT -- Continue to next step.
7. CHECK DTC OUTPUT
(a) Clear the DTCs See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Engine Immobiliser System.
(b) Recheck for DTCs See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Engine Immobiliser System.
OK:
DTC B2799 is not output.
NG -- REPLACE ID CODE BOX (IMMOBILISER CODE ECU) See: Accessories and Optional Equipment/Antenna/Keyless
Start Antenna/Service and Repair/Removal
OK -- END (ECM WAS DEFECTIVE)
No comments:
Post a Comment