Text in Illustration
NG -- REPLACE FLOOR WIRE
OK -- Continue to next step.
18. CHECK FLOOR WIRE (SHORT TO GROUND)
(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE FLOOR WIRE
OK -- Continue to next step.
19. CHECK SIDE AIRBAG SENSOR RH
(a) Connect the connector to the rear airbag sensor RH.
No comments:
Post a Comment