2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 2422

P-Door Motor (Power Window Regulator Motor Assembly (for Front Passenger Side))

RL-Door Motor (Power Window Regulator Motor Assembly (for Rear LH Side))

RR-Door Motor (Power Window Regulator Motor Assembly (for Rear RH Side))

INSPECTION PROCEDURE

NOTICE:

* When the power window regulator motor assembly is reinstalled or replaced, the power window control system must be

initialized.

* After a door glass or a door glass run has been replaced, the jam protection function may operate unexpectedly when the auto

up function is used. In such cases, the auto up function can be reinitialized by repeating the following operations at least 5

times:

* Close the power window by fully pulling up the multiplex network master switch assembly or power window regulator

switch assembly and holding it in the auto up position.

* Open the power window by fully pushing down the switch.

PROCEDURE

1. PERFORM ACTIVE TEST USING TECHSTREAM (APPLICABLE LOCATION)