Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. REPLACE REMOTE OPERATION BOARD
(a) Replace the remote operation board See: Accessories and Optional Equipment/Navigation System/Navigation Display/Service and
Repair/Removal and Replacement/Multi Info Display/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for HDD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation
System/Service and Repair/Navigation Receiver (for HDD)/Removal
OK -- END
From 08/2009
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HDD): B1596,B1563: No Response from Remote Touch
B1596 - No Response from Remote Touch
B1563 - Remote Touch Disconnected
DESCRIPTION
The display and navigation module display and remote touch are connected by the MOST communication line.
When a MOST communication error occurs between the display and navigation module display and remote touch, these DTCs will be stored.
HINT
For the MOST network, the display and navigation module display is the master unit.
No comments:
Post a Comment