2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 1298

NG -- REPLACE NO. 2 FLOOR WIRE

OK -- REPLACE FRONT SEAT INNER BELT ASSEMBLY LH See: Restraints and Safety Systems/Seat Belt Systems/Seat

Belt/Service and Repair/Removal and Replacement/Rear Seat Inner Belt Assembly (for LH Side)/Removal

2. CHECK NO. 2 FLOOR WIRE (SHORT)

(a) Disconnect the No. 2 floor wire from the front seat belt inner belt assembly LH.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPLACE NO. 2 FLOOR WIRE

OK -- REPLACE FRONT SEAT INNER BELT ASSEMBLY LH See: Restraints and Safety Systems/Seat Belt Systems/Seat

Belt/Service and Repair/Removal and Replacement/Rear Seat Inner Belt Assembly (for LH Side)/Removal

3. CHECK NO. 2 FLOOR WIRE (SHORT TO B+)

(a) Turn the engine switch off.

(b) Disconnect the cable from the negative (-) battery terminal.

NOTICE:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.