2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 1288

that link the No. 2 floor wire, and front seat wire RH.

(e) Check that the connector terminals are not damaged.

OK:

The terminals are not deformed or damaged.

NG -- REPLACE WIRE HARNESS

OK -- Continue to next step.

3. CHECK OCCUPANT CLASSIFICATION SYSTEM CIRCUIT (OPEN)

(a) Connect the connectors that link the front seat wire RH and No. 2 floor wire.

(b) Using SST, connect terminals 16 (FSR+) and 24 (FSR-) of connector B.

NOTICE:

Do not forcibly insert SST into the terminals of the connector when connecting.

SST : 09843-18040

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- CHECK NO. 2 FLOOR WIRE (OPEN)

OK -- Continue to next step.

4. CHECK OCCUPANT CLASSIFICATION SYSTEM CIRCUIT (SHORT)

(a) Disconnect SST from connector B.

(b) Measure the resistance according to the value(s) in the table below.