The connectors are properly connected.
HINT
If the connectors are not connected securely, reconnect the connectors and proceed to the next inspection.
(d) Disconnect the connectors from the center airbag sensor assembly and radio receiver assembly*1 or accessory meter assembly*2. Also
disconnect the connectors that link the instrument panel wire and No. 2 instrument panel wire.
*1: w/ Navigation System
*2: w/o Navigation System
(e) Check that the terminals of connectors are not damaged.
OK:
The terminals are not deformed or damaged.
NG -- REPLACE WIRE HARNESS
OK -- Continue to next step.
3. CHECK PASSENGER AIRBAG ON/OFF INDICATOR
(a) Connect the connectors that link the instrument panel wire and No. 2 instrument panel wire.
(b) Connect the connector to the radio receiver assembly*1 or accessory meter assembly*2.
*1: w/ Navigation System
*2: w/o Navigation System
(c) Connect the cable to the negative (-) battery terminal.
(d) Turn the engine switch on (IG).
(e) Check the passenger airbag ON/OFF indicator operation.
OK:
The passenger airbag ON/OFF indicator does not come on.
NG -- CHECK PASSENGER AIRBAG ON/OFF INDICATOR CIRCUIT (OPEN)
OK -- Continue to next step.
4. CHECK CENTER AIRBAG SENSOR ASSEMBLY
(a) Connect the connector to the center airbag sensor assembly.
(b) Connect the cable to the negative (-) battery terminal.
(c) Turn the engine switch on (IG), and wait for at least 60 seconds.
(d) Clear the DTCs stored in the memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(e) Turn the engine switch off.
