B1572
CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: B1572: Telephone Microphone Error
B1572 - Telephone Microphone Error
DESCRIPTION
This DTC is set when the DCM (Telematics Transceiver) detects a malfunction in the telephone microphone assembly circuit.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG) and wait for 10 seconds.
(d) Turn the Techstream on.
(e) Perform "HEALTH CHECK" and check for current DTCs See: Accessories and Optional Equipment/Emergency Contact
Module/Testing and Inspection/Initial Inspection and Diagnostic Overview/Safety Connect System/Health Check.
Result:
B -- CHECK FOR INTERMITTENT PROBLEMS See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
A -- Continue to next step.
2. INSPECT MAP LIGHT ASSEMBLY (TELEPHONE MICROPHONE POWER SOURCE)
(a) Remove the map light assembly but do not disconnect the connectors See: Accessories and Optional Equipment/Emergency Contact
Button/Service and Repair/Manual (SOS) Switch/Removal.
(b) Measure the voltage according to the value(s) in the table below.
No comments:
Post a Comment