INSPECTION PROCEDURE
PROCEDURE
1. CHECK REAR SPEED SENSOR INSTALLATION
(a) Check the speed sensor installation (for 2WD).
OK:
There is no clearance between the sensor and the rear axle carrier.
(b) Check the speed sensor installation (for AWD).
OK:
There is no clearance between the sensor and the rear axle carrier.
The installation bolt is tightened properly.
Torque
8.0 N*m (82 kgf*cm, 71 in.*lbf)
Result:
D -- INSTALL REAR SPEED SENSOR CORRECTLY (for AWD)
C -- INSTALL REAR SPEED SENSOR CORRECTLY (for 2WD) See: Brakes and Traction Control/Antilock Brakes / Traction
Control Systems/Wheel Speed Sensor/Service and Repair/Rear Speed Sensor/Installation
No comments:
Post a Comment