2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) C CODE Page 428

HINT

- DTC C1415 is for the rear speed sensor RH.

- DTC C1416 is for the rear speed sensor LH.

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:

When replacing the brake actuator assembly, perform zero point calibration and store system information See: Brakes and

Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Programming and Relearning.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (MOMENTARY INTERRUPTION)

(a) Using the Techstream, check for any momentary interruption in the wire harness and connector corresponding to the DTC See:

Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Component Tests and General

Diagnostics/Check for Intermittent Problems.

ABS/VSC/TRAC

OK:

There are no momentary interruptions.

HINT

Perform the above inspection before removing the sensor and connector.

NG -- CHECK REAR SPEED SENSOR INSTALLATION

OK -- Continue to next step.

2. READ VALUE USING TECHSTREAM (REAR SPEED SENSOR)

(a) Turn the engine switch off.

(b) Connect the Techstream to the DLC3.