2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) Page 345

(b) Disconnect the cable from the negative (-) battery terminal.

NOTICE:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Connect the connector to the radio receiver assembly*1 or accessory meter assembly*2.

*1: w/ Navigation System

*2: w/o Navigation System

(d) Connect the cable to the negative (-) battery terminal.

(e) Turn the engine switch on (IG).

(f) Check the indicator according to the conditions in the table below.

Result:

Result:

Text in Illustration

C -- REPLACE ACCESSORY METER ASSEMBLY See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /

Carrier/Service and Repair/Removal and Replacement/Accessory Meter/Removal

B -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact

Disc/Radio/Stereo/Service and Repair/Removal

A -- Continue to next step.

Part 2

16. CHECK CENTER AIRBAG SENSOR ASSEMBLY

(a) Turn the engine switch off.

(b) Disconnect the cable from the negative (-) battery terminal.

NOTICE:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Connect the connector to the center airbag sensor assembly.